Welding system Deca Miga 380, Multiprocess inverter welding generators of the Miga line are versatile, very simple to use but with a welding quality usually found in more sophisticated products. The Miga line is the right quality/price ratio for those who have to do maintenance, small buildings, workshop works.
- The exclusive Easy Mig Full Setting interface allows you to weld Synergistic / MIG Manual / NO GAS / MMA / TIG LIFT in MIG.
- In synergistic Mig mode it makes the welding of many metals simple such as: steel, stainless steel, aluminum and the welded with the silicon copper wires or aluminum copper.
- In MMA mode it allows the welding of rutile and basic covering electrodes.
- In Tig Lift mode it is perfect for precision work.
- The Miga 380 model delivers 200 amp into continuous current. Perform 200 mm and 300 mm barrel barrels. The MIG torch is equipped with a quick attack euro. The rear housing supports 4 m3 cylinders.
- The power supply voltage is 230 volt single -phase, but it can also be powered by current generators.
- Through the main Full Setting command, in addition to selecting the welding process, you can adjust other important parameters to always obtain an excellent result.
The main features of the Miga series are:
- Synergistic MIG: extremely simple regulation of the system.
- MIG Inductance adjustment: ("Full Setting" command) it is possible to adjust this value to reduce the splash of welding.
- Adjustable MMA ARC Force: ("Full Setting" command) to obtain optimal welding with each electrode it is possible to adjust the temporary increase of the current when the electric arch becomes short.
- MMA Hot Start Automatic: facilitates the trigger of the arch.
- Tig Lift: the trick of the arch takes place by touching the piece with the electrode and slowly lifting it. The risk of contaminating the piece with the tungsten electrode is modest.
- Automatic TIG SLOPE UP: progressive increase in the welding current to obtain a start of the impeccable welding cord.
- Tig Slope Down adjustable: ("Full Setting" command) decrease in the welding current to obtain an end of the impeccable welding cord.
Technical specifications
- Adjustment field:
- MIG: 10 - 200AH
- MMA: 10 - 160AH
- TIG: 10 - 200A
- Ah service 40 ° C - EN 60974-1
- Empty voltage: 86V
- Volt voltage voltage (50/60 Hz): 1 PH - 230V
- Absorbed power 60% / max: 2.8 / 5 kW
- Fusible: 20ah
- Generator: +/- 30% (7 kW)
- Mig Man/Syn thread
- Steel wire (Ø mm): Ø 0.6 - 0.8 - 0.9 - 1.0 mm
- Inox wire (Ø mm): Ø 0.8 - 1.0 mm
- Al.mg thread - al.si (Ø mm): Ø 0.8 - 1.0 - 1.2 mm
- Wire Cu.si 3 - Cu.al 8 (Ø mm): Ø 0.8 - 1.0 mm
- Animated thread (steel) (Ø mm): Ø 0.8 - 0.9 - 1.0 - 1.2 mm
- Usable thread coil: Ø 200 - 300 mm
Electrodes
- Rutile: Ø 1.6 - 4.0 mm
- Basic: Ø 1.6 - 4.0 mm
- TIG: Ø 1.0 - 4.0 mm
- Trainophile: 2 rollers
- Output connections: DX 25 mm2 / euro
- Thermostatic protection: yes
- Weight Kg ≅: 30
- Dimensions: 775 x 400 x 790mm
Functions
- Manual welding
- Synergistic welding: Mig/Mag, No Gas
- Electronic inductance: Mig/Mag, No Gas - Adjustable
- Burn Back: Mig/Mag, No Gas
- Hot Start: Mig/Mag, No Gas, MMA
- Arc Force (MMA): adjustable
- Anti-sticicking (MMA/TIG): Yes
- Tig Lift (Tarcia with tap): Yes
- Slope Up: Tig
- Slope Down: Tig - Adjustable
Accessories supplied
- Torcia MIG 180a 3m Euro (thread Ø 1.0 mm FE)
- Rollers (Ø 0.6 / 0.8 mm FE)
- Cable with mass clamp
- Gas tube