The
Fischer FASTGRIP 800 Foam has been tested at an accredited laboratory according to EOTA ETAG 004 and TR046. One can of FASTGRIP 800 is equivalent to approximately 30 kg of cement-based adhesive and is sufficient to install between 8÷12 m2 of insulating panel.
- High acoustic and thermal insulation capabilities.
- Little expansion during curing, no post-expansion and shrinkage after curing.
- Does not contain CFCs and H-CFCs.
- Also ideal for gluing plasterboard panels. It allows you to level the slabs on the vertical, horizontal and in depth
planes
APPLICATIONS AND CERTIFICATIONS
- Gypsum plasterboard panels
- Rectified elements in internal partition walls (non-structural)
- Water barrier and vapor barrier films such as STRIP INSIDE and STRIP OUTSIDE for window and door assembly
- Electrical boxes and corrugated pipes in electrical installations
- Positioning of shower trays
INSTRUCTIONS FOR USE
- Remove dirt, oil, grease and dust from the surfaces to be glued.
- Shake the cylinder vigorously with the valve upside down at least 20 times before use and screw on the dispensing spout (FASTGRIP M750) or the fischer PUPN 1 or PUPM 3 gun.
- Moisten the surfaces with a water sprayer before application.
- Apply the adhesive foam to the edges of the panel and then to its surface in a "W" shape. Wait 1 minute before fixing it on the wall. Level the panels within 10÷15 minutes.
- Shake the can regularly during application. If the thickness of the opening is > 30 mm, foam in several layers and moisten after each layer.
- Clean the work tools and the fresh product with the fischer PUR cleaner. The hardened product can only be removed mechanically.
- Protect from exposure to UV rays.
TECHNICAL DATA
- Storage: 12 months
- Contents: 800 ml
- Free foam yield: 47l