The
Fischer PANEL 800 foam for plasterboard panels is perfect for gluing plasterboard, for example to build false walls or cover existing structures, even unfinished ones. Can also be used to glue insulating panels made of EPS, XPS and synthetic materials (e.g. mineral wool). Fast and safe PANEL allows you to precisely glue and level the panels and can correct up to 2 cm of wall irregularities.
- Panel 800 is the fast and safe polyurethane adhesive that allows you to precisely glue and level plasterboard panels and insulation sheets in general.
- Yield up to 12m2
- Corrects up to 2 cm of wall irregularities.
- Controlled expansion: in the measurement after 24 hours the slab does not show any movement.
- Contributes to thermal and acoustic insulation.
- Product with very low emissions.
INSTRUCTIONS FOR USE
- Remove dirt, oil, grease and dust from the surfaces to be glued.
- Shake the cylinder vigorously with the valve upside down at least 20 times before use and screw on the fischer gun.
- Moisten the wall before gluing the panels.
- Provide a removable support at the base of the panel.
- Apply the foam first on the edges and then on the “W” shaped panel in the case of porous supports. Apply in vertical stripes spaced approximately 10 cm in the case of non-porous supports (e.g. plastic or metal).
- Wait 90 seconds before placing the panel on the wall with light pressure. and level the panels within 10-15 min.
- If the panels are subject to stress such as strong expansion or wind pressure, secure them after 2 hours with the appropriate fischer anchors.
- Clean any splashes of fresh foam with the special fischer PUR 500 cleaner.
- After hardening, residues can only be removed mechanically.
- Protect the foam from exposure to UV rays.
TECHNICAL DATA