There Fischer Panel Fischer 800 For plasterboard panels it is perfect for the gluing of plasterboard to ES to build counterparets or cover existing structures even in the raw. Also usable to glue insulating panels in EPS, XPS and synthetic materials (e.g. mineral wool). Quick and safe panel allows you to glue and level the panels precisely and can correct up to 2 cm of irregularities of the wall.
- Panel 800 is the fast and safe polyurethane adhesive that allows you to glue and level the plasterboard panels and the insulation plates in general.
- Rendered up to 12m2
- Corrects up to 2 cm of irregularities of the wall.
- Controlled expansion: in measurement after 24h the slab shows no movement.
- It contributes to thermal and acoustic insulation.
- Product with very low emissions.
Instructions for use
- Remove from the surfaces to be glued dirty, oil, fat and dust.
- Vigorously shake the cylinder with the upside -down valve at least 20 times before use and screw the Fischer gun.
- Moisten the wall before gluing the panels.
- Provide for removable support at the base of the panel.
- Apply the foam first on the edges and then on the "W in the case of porous supports. Apply in the spacer strips spaced about 10 cm in the case of non -porous supports (e.g. plastic or metal).
- Wait 90 seconds before positioning the panel on the wall with light pressure. and level the panels within 10-15 min.
- If the panels are subject to stresses such as strong dilations or wind push, fix them after 2 hours with the appropriate Fischer Tesselli.
- Clean any splashes of fresh foam with the special Fischer cleanher even 500.
- After hardening it is possible to remove the residues only mechanically.
- Protect the foam from exposure to UV rays.
Technical data
