Semi -rapid mortar Fassa Gaper 3.30 Tixotropic, fiberin-forced, extra-white and gray, for interiors and outdoors.
USE
GAPER 3.30 is used for the regularization and shaving of non -plans inland and outdoors, horizontally and vertically, with thicknesses from 3 to 30 mm. It is also suitable for restoring steps, depressions and holes of the screeds. In a short time the supports will be adequate for the laying of ceramic, stone material or waterproofing sheaths (such as Aquazip GE 97 etc.).
Processing
Knead Gaper 3.30 Gray with 21-23% of clean water (to each 25 kg sack add 5.3-5.7 liters); GAPER 3.30 White will instead be stunned with 23-25% of clean water (to each 25 kg bag add 5.8-6.2 liters).
Mix the mortar by hand or with mechanical agitator for no more than 3 minutes; Take the surface with a metal spatula, then spread the dough until the desired thickness (maximum 30 mm) is obtained. For higher applications
At 30 mm it is necessary to wait for the complete hardening of the product of the previous hands. In the case of discontinuity pronounced of the surface (presence of joints or strong differences in altitude of thickness) or the presence of high supports
Possibility of dimensional variations due to thermal or hygrometric effect, insert a Fassanet 160 type-stay fiber fiberglass network inside the first hand.
For applications on not very absorbent backgrounds, it is recommended to knead GAPER 3.30 with the latex AG 15 in a 1: 3 ratio (a part of latex and three of water) to improve the product adhesion characteristics.
